Water & Waste

Connector that pushes into base of many Reich taps to enable a 12mm push fitting to be fitted onto tap. Available in Red (Hot) & Blue (Cold) So...

A replacement knob and spindle for the Whale Elegance series taps.

Part Number: 255-215 A Shurflo strainer for fitting on inlet of Shurflo pumps to stop dirt and debris entering the water pump. 1/2" threaded fittin...

Plastic tap spout for various Reich taps. Available in Matt Nickel & Chrome.

Part Number: 101470PK A genuine replacement drain plug for a Carver cascade 2 water heater produced after 1987.

Part Number: EP1622 Whale 12 volt high flow pump with Carver/Truma Crystal 2 type fitting end. Suitable for use on microswitched and pressurised s...

A universal mains water adaptor kit which enables you to connect to an outside mains water tap to never have to worry about filling your water cont...

Part Number 12mm: WF3000 Carbon filter for removing unpleasant smells and taste from your water supply. Maintenance free design that needs replacin...

Part Number: 101039PK A replacement pressure relief valve for a Carver cascade 2 water heater.

Part Number: EP1612 Whale Watermaster 12 volt high flow pump  Suitable for use on microswitched and pressurised systems. 3-16 Litres per minute ...

Part Number: 101026PK A genuine replacement hot water outlet for a Carver cascade 2 water heater .

An outlet socket for waste water 28mm in grey plastic.  

Part Number: 50713 A genuine Thetford reed switch for SC250 toilets with the single waste tank level indicator .  

Part Number: 5072706 A complete holding tank mechanism for the Thetford C250 / C260 toilets. Complete with sliding cover and lipseal. Easy twist in...

Part Number: 46340-51 Truma ultraflow pistol grip water inlet hose for caravans with onboard pump fitted.

 Fenwicks Waste Pipe & Tank Cleaner  Cleans and freshens waste tanks and toilet cassettes. Its powerful formula removes stubborn stains and un...

Part Number Right Hand: 3233106 Part Number Left Hand: 3233206 A complete holding tank mechanism for the Thetford C400 / C500 toilets. Easy twist i...

Part Number: 26610 A genuine replacement Thetford rubber door seal for the service door 5. 

Part Number: 2660757 A genuine Thetford Zadi lock housing for all Thetford service doors. Housing only. Lock not included.  

A vented water tank filler cap with lock and keys. Diameter: 75mm Available in White & Black 

Part Number: 01740300B A Flojet strainer for fitting on inlet of Flojet pumps to stop dirt and debris entering the water pump.  

Part Number: ES1000 Water inlet socket for Whale Watermaster microswitched systems. Supplied in Beige.      

Comet Roma single lever mixer tap with built in microswitch finished in chrome. 33mm hole cut out. 30cm hose tails with 12mm push fit ends. Supplie...

Part Number: 2662680 A genuine Thetford SD3 service kit for the SD3 locking service door. Kit contains springs, catches, seals and covers.