A replacement worm block for AL-KO corner steadies with a 20mm spindle.
Chassis & Axle Spares
Pneumatic jockey wheel with inflatable tyre. 260mm diameter x 85mm width with 21mm spindle
Part Number: PO300 Set of 4 universal corner steady pads. Gives corner steadies greater surface area when parked on soft ground.
Jockey wheel clamp and handle for a 48mm jockey wheel shaft from AL-KO.
A replacement worm block for AL-KO corner steadies with a 16mm spindle.
A 90mm jockey wheel clamp handle.
Take all the hard work out of winding down your caravan corner steadies with this handy little drill fitting. Fits directly into your electric dril...View full details
Plastic jockey wheel with solid rubber band tyre. 210mm diameter x 65mm width with 21mm spindle
A standard conical M12 wheel bolt from AL-KO for caravan and trailer wheels.
Part Number: 0703 A pair of Milenco plastic wheel trims in Magnolia. Fit 14" steel wheels.
Jockey wheel assembly with plastic wheel soft rubber tyre. 48mm shaft, 400mm in length.
Strong plastic wheel chock to secure your trailer/caravan when parked.
A one use hub nut for AL-KO axles. Fits AL-KO 2361 hubs. Torque Setting 290Nm Please make sure you are ordering the correct size for your caravan, ...View full details
Plastic jockey wheel with solid rubber band tyre. 165mm diameter x 50mm width with 20mm spindle
Part Number: 641549 Replacement AL-KO Euro bearing for 2051 compact drum ID: 34mm / OD 64mm / Depth 37mm
Part Number: 582226 Replacement AL-KO Euro bearing for 2361 drum ID: 42mm / OD 80mm / Depth 42 mm
Part Number: 581736 Replacement AL-KO Euro bearing for 1637 drum ID: 30mm / OD 60mm / Depth 37 mm
Part Number: 1389238 Set of 4 brake shoes complete with fitting springs etc. Fits AL-KO 2051 brake drums 200mm x 50mm AL-KO number - stamped on bac...View full details
Genuine AL-KO Long life detachable bowden cable. Fits AL-KO braking mechanisms. Available sizes: 890mm & 1320mm.
A spherical M12 wheel bolt from AL-KO for caravan and trailer wheels.
An alloy wheel conical M12 wheel bolt from AL-KO, for caravan alloy wheels.
A one use hub nut for BPW axles. Fits BPW hubs with one piece sealed bearing. Torque Setting 330Nm
A one use hub nut for BPW axles. Fits BPW hubs with sealed bearing from June 1998. Torque Setting 280Nm
A one use hub nut for Knott-Avonride axles. Fits Knott-Avonride X&Y series hubs.