Part Number Ivory: 40060-60500 Part Number White: 40060-60600 Fits the old Carver and Truma Crystal 2 compact water inlet. Complete with hinge pin...View full details
A replacement fusible plug for the Carver Cascade 2 water heater. Manufactured in the UK to the same specification as the original (now obsolete) C...View full details
Part Number: 34151-03 Top fitting for Hot water outlet on Truma Ultrastore water heater. Push fit type.
Part Number: 101026PK A genuine replacement hot water outlet for a Carver cascade 2 water heater .
Part Number: 101039PK A replacement pressure relief valve for a Carver cascade 2 water heater.
Part Number: 0090-90400 Gas control knob for the S3004 and S5004 new type gas fires.
Part Number: 39141-02 Fits over exhaust / flue on Truma Trumatic E2400 gas heater.
Part Number: 70151-03 Bottom fitting for cold water inlet on Truma Ultrastore water heater. Push fit type.
Part Number White: 40060-97300 Part Number Ivory: 40060-96200 Fits new type Truma Ultraflow water inlets with filter. Available in Ivory or White
Part Number: 46040-01 Truma Ultraflow 12 volt pump with pistol grip type fitting end. Can be used with Truma Ultraflow filter inlet and Ultraflow c...View full details
Part Number: 70122-01 Truma Ultrastore water heater cowl cover. Covers flue to stop insects and debris getting into water heater. Supplied in White.
Part Number: 0129466 Truma bulkhead gas regulator with built in test point fitted to many caravans & motorhomes. To be used with Propane and ...View full details
Part Number: FL107 Water Pump retaining clips to hold pump in place. Supplied in pack of 2.
Part Number: 46030-01 Water inlet without filter capability for Truma Ultraflow system.
Part Number: 40060-96700 Bridge connector which fit onto Truma Ultraflow water inlet 12mm JG push fittings.
Part Number Ivory: 40060-97400 Part Number White: 40060-97300 Fits Truma Ultraflow compact water inlet. Available in Ivory or White
Part Number White: F106W Part Number Ivory: F106 Fits old type Carver and Truma Crystal water inlet with the screw in filter. Complete with hinge p...View full details
Part Number: 7000-02500 A replacement Truma ultrastore heating element 450 watt.
Part Number White: F105W Replacement filter housing for Truma / Carver Crystal 2 systems This is a aftermarket Filtapac product not genuine Truma. ...View full details
A replacement cold water inlet with non return valve for a Carver cascade 2 water heater .
Part Number: AMT107 An aftermarket replacement drain plug for a Carver cascade 2 water heater produced after 1987.
A beige cowl for Henry water heaters that will fit the old Carver Cascade 2 water heater.
Gas burner module for Henry water heaters, also fits the old Carver Cascade 2 water heater. Wall switch included that must be fitted when using on ...View full details
Part Number: 40000-46000 Control switch that fits on the Truma 3002/5002 gas fire to control fan speed.